TOOLIOM 50A Non-Touch Pilot Air Plasma Cutter reviews

TOOLIOM 50A Non-Touch Pilot Air Plasma Cutter reviews

Today we discuss TOOLIOM 50A Non-Touch Pilot Air Plasma Cutter reviews. It’s perfect for home use, but it can also be used in professional fabrication shops. This product is made from high-quality components that will last a long time. The best part about this product is how easy it is to get started with! You’ll be cutting metal in no time!

This is a TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter. It features a dual voltage 110V/220V IGBT inverter, arc starting time can be set to 0.5s, 1s, 2s, or 3s; it also has an auto-off function when the air pressure of the compressor falls below 0.8Mpa;

it’s equipped with an overload protection device and over-temperature protection device which ensure that the machine will not be damaged even if it is overloaded or overheated. It has a large LCD display screen which shows the information related to the job.

The Plasma Cutter is the best choice for removing paint, rust, and other substances from metal. You can cut through rough surfaces easily because it generates less slag than alternatives such as copper or brass with an equally long life before needing to be replaced!

plasma torches interchangeable
plasma torches interchangeable

TOOLIOM 50A Non-Touch Pilot Air Plasma Cutter reviews

No products found.

Suitable for materials with a lot of vibration and bumps or holes, due to its large cutting area and non-touch pilot arc cutting processes. The blade’s cutting effect is extremely ideal, allowing it to complete even the toughest tasks, such as spraying painted surfaces.

Non-touching Polit ARC Since the torch head does not need to touch the metal plate, it will arc. It may cut through rough, painted, and rusted surfaces effectively for longer consumable life. Up to 50A output can handle 1/2″ Clean Cut at 220 volts. Auto-voltage can be set to 110V or 220V operation.

A digital display is included so that you can quickly read current data. At 110 volts, use a 25A breaker; at 220 volts, use a 40A breaker. Air pressure: 220 V @73 PSI 50 Amps; 110 V65 PSI 40 Amps.

Product Specifications:

  • Input Voltage:110V/220V
  • Input Current:23.2A(110V)/21.6A(220V)
  • Rated Duty Cycle:60%(50A)
  • Protection Class:IP21S
  • Insulation Class:F
  • Output Voltage:96V
  • Max. Output Current:50A

Package Included

  • TL-50C Plasma Cutter
  • Plasma Cutting Torch
  • 110 Volt to 220 Volt power adapter
  • 10′ Ground Clamp
  • Gas Hose 8′
  • Air Pressure Regular
  • Electrode *3, Nozzle *2, Extend Tips *3
  • Brush
  • Instruction

The TOOLIOM 50A Non-Touch Pilot Air Plasma Cutter reviews show us how great a tool it is! With this machine, you can cut through steel, aluminum, copper, or brass with ease without having to worry about the clean-up process. It also features a safety protection system and comes with a dual voltage power supply so you don’t have to buy any additional equipment in order to get started using the plasma cutter right away!

TOOLIOM 50A Non-Touch Pilot Air Plasma Cutter reviews
TOOLIOM 50A Non-Touch Pilot Air Plasma Cutter reviews

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *